Application Process

QUALITY ARIZONA PAINT COATING APPLICATIONS …EVERY TIME

Rhino Shield Application Steps

The Rhino Shield System is second to none in the industry and is the reason we can guarantee the life of your new Arizona exterior for so long. The steps below represent the typical process of an Arizona application, but please note, every home and building is unique and some steps may be done differently or additional steps may be required.

1. THOROUGH INSPECTION

It is critically important that a thorough inspection is done to determine the condition of the underlying substrates and what preparation work will be needed. A plan is created to accomplish the whole project successfully.

Home Inspection By Rhino Shield In Phoenix

2. REPAIR

Rhino Shield repairs the stucco or other exterior before as in important part of the preparation. Stucco repair and preparation for the primer is key to the success of the coating. Our Exterior Experts know stucco exteriors and know how to bond, seal and protect them.

 

3. SANDING AND SCRAPING

All loose paint, stucco or debris is removed by scraping and any remaining is sanded by hand or machine.

Scraping Loose Stucco Material In Scottsdale Az

Final-Inspection

4. CAULKING

Once the surfaces have been scraped and sanded, filling of cracks, small holes in the substrate, caulk around all windows and door casings to prevent moisture from invading the coating through these areas.

5. MASKING

All areas which are not to be coated are masked off, covered, or temporarily removed (such as lighting fixtures, mailboxes, drainpipes, utility boxes, etc.) Special attention is given to plants, lawns, decks, windows, and other areas prone to overspray.

Masking

Final-Inspection

6. PRIMING

All areas with substrate are first coated with an oil based primer. Then the application of our proprietary solid coat Rhino Shield First Coat / Adhesive Primer Sealer to act as a bonding agent to make the Finish Coat stay on your home or building without cracking or peeling.

7. APPLY THE FINISH COAT

At last, after all the prep work and priming is completed, the proprietary Rhino Shield Elastomeric, Ceramic Coating is applied.

Applying Rhino Shield In Phoenix

Final-Inspection

8. DETAIL FINISH TOUCH-UP

After the final finish coat is applied, detailed touch ups are done on the exterior such as windows, awnings, etc., and then remove all masking materials.

9. CLEAN UP JOB SITE

The goal of the contractor is to make your home look as best as possible. Great pride in giving each customer a full, thorough, and detailed cleanup to return the job site to its original condition, if not better.

Clean Up Job Site

Final-Inspection

10. FINAL INSPECTION

The project is not done until you’re completely satisfied with the work!

Sales Volume 2023

Top Sales Volume 2023

Dealer Owner Of The Year 2023

Gold Quality 2023

Growth Award 2023

High Growth 2023

This will close in 0 seconds

This will close in 0 seconds

This will close in 0 seconds

This will close in 0 seconds